Benjamin Flower Care Guide – Uplifers

Benjamin’s flower is a plant with a stem consisting of small and green leaves. This plant, which can reach up to 2 meters in height when viewed indoors, is a wonderful decoration both at home and in the office, and also helps to purify the air.

Although native to Australia and Asia, the Benjamin flower is a plant that can grow up to 20 meters tall in its natural environment, it does not grow too much when viewed indoors with the necessary pruning procedures. Although the Benjamin flower is not a very demanding plant, it needs the right conditions to grow. You can read everything you want to know about the Benjamin flower and the tricks to look out for when caring for the Benjamin flower in this article.

Who is Benjamin Blossom?

Benjamin flower is a broad-leaved evergreen tree native to tropical and subtropical climates. With a lifespan of 20 to 50 years, this plant can be cared for indoors, such as at home and in the office. In order for indoor Benjamin flower to stay about 1-2 meters long, the plant usually needs to be pruned. Benjamin flower, which is a fast growing plant, may need to be repotted once a year. You can make sure your plant is alive and well by examining the general characteristics and needs of the Benjamin flower, which is often used in indoor decoration. The general characteristics and needs of the Benjamin flower are as follows:

• botanical name: ficus benjamina
• Family: mulberry
• Type: evergreen tree
• Dimensions achieved in adulthood: Height 1-2 meters indoors, up to 20 meters outdoors
• Solar Need: Bright environment without direct sunlight
• Soil request: Nutrient-rich, well-drained potting soil
• soil pH: Acidic or neutral to sour
• Flowering period: It doesn’t bloom.
• Source: Asia, Australia
• Toxicity: It is toxic to humans and animals.

How to care for Benjamin flower

The Benjamin flower is very meticulous about growing conditions, and this plant sheds its leaves when the conditions it needs are not met. For this reason, care should be taken to create a bright but not direct sunny environment and maintain a constant temperature of at least 16°C when caring for the Benjamin flower. Things like wind, insufficient lighting, improper watering, and moving the pot can cause the plant to shed its leaves. The points to pay attention to when considering the Benjamin flower indoors are as follows:

easy request

A bright environment is one of the conditions that the Benjamin flower needs. For this reason, it would be good to place your plant in a location that receives sun in the morning and is usually shaded in the afternoon. However, even if you think you are not providing the right conditions, you should not frequently change the location of your plant. Since Benjamin’s flower can shed its leaves even if it is rotated around itself, you should be careful not to change the place where you put the pot.

soil request

It is important to prepare well-drained soil for the Benjamin flower. These plants do not particularly need soil rich in nutrients or organic matter. You can choose soil containing perlite, sand, or vermiculite to make the perfect mix for your plant.

water request

It is important to keep the Benjamin flower soil constantly moist. However, care should be taken to ensure that the soil does not remain wet. Otherwise, the plant may shed its leaves and rot the roots. You need to take care of the regular watering of the Benjamin flower, which is very sensitive to moisture. You can water the plant when the top few inches of soil are dry.

temperature request

For the Benjamin flower, it is important to maintain a constant temperature of 16 ° C and above. For this reason, it is necessary to maintain the temperature at a certain level in order to prevent fluctuations in the internal temperature in winter. In summer, the air conditioner should not be set below 20 °C, so as not to reduce the room temperature too much.

moisture requirement

Benjamin flower, a plant of tropical and subtropical climates, loves an environment with high humidity. Low environmental humidity can lead to drying and wrinkling of the leaves. Therefore, if the indoor humidity is insufficient, you may want to consider using a humidifier. You should also ensure that the soil is moist, and the leaves of the plant are sprayed with water from time to time.

request for fertilizer

Benjamin flower needs a lot of fertilizer, especially during the growth period. For this reason, you can fertilize your plant with a slow release fertilizer early in the growing season. You can fertilize the Benjamin flower every month in spring and summer, and bimonthly in autumn and winter.

How to prune Benjamin’s flower

If your plant has grown too tall or you want to shape it, you can prune it outside of the growing season. The Benjamin flower usually grows in spring and summer, slowing down in autumn and dormant in winter. You can prune during the winter months as the plant will be less susceptible to injury from dormant pruning. In addition to pruning, you can collect leaf litter throughout the year and prune any branches that look sick.

How to propagate the Benjamin flower?

To reproduce Benjamin’s flower, you can follow these steps:

• Select a healthy-looking branch from your plant and cut it back to 7-12 cm. Cut at least 0.5 cm below the bottom leaves. Cut the leaves off the bottom half of the branch. If you like, you can dip the cut end of the branch into the rooting hormone.
• Bury the cut part in a pot of wet peat. Cover the pot with a large plastic bag. Make sure that the package does not touch the cut part of the branch and tie the package from below.
• Place the pot in a bright place, out of direct sunlight.
• Try to keep the pot at 16°C or above. Spray the plant with water to increase moisture levels and water when the soil is dry.

The plant should take root in about 2-4 weeks. After about 6 weeks, you can transplant the plant into a 15 cm pot and continue to care for it as you would with a Benjamin flower.

Why does Benjamin’s flower drop leaves?

Periodic leaf fall is normal for the Benjamin flower. However, if the plant sheds leaves too much and often, a problem arises. The factors that cause Benjamin’s flower to fall are as follows:

Environmental change

Benjamin’s environment-altering flower is usually deciduous. For this reason, your plant may shed its leaves during seasonal changes or changes in temperature and humidity in the house. To prevent this situation, you should keep your plant away from windy places, air conditioners and heaters, and not move your plant.

Wrong watering

Incorrectly watered Benjamin, the leaves may turn yellow and fall off. To make sure you water your plant properly, you should only water when the top of the soil is dry. Excessive watering can cause root rot, so you need to change the pot of the plant and get rid of the roots affected by root rot.

little sunlight

Although the Benjamin flower is a plant that doesn’t want direct sunlight, it does need a bright environment. The leaves of a Benjamin plant that receives very little sunlight may drop or the color of the leaves may turn white.

Pests

There are some pests that damage the leaves of the Benjamin flower. If you suspect your plant may have pests, you can check to see if the leaves are sticky or dripping from the leaves. If pests are causing your plant to defoliate, you will need to use pesticides.

Mushroom

The Benjamin plant can be affected by both fungus and pests. The fungus can cause yellow or brown spots on the plant’s leaves and leaf drop.

You may be interested in: